Here you can download the latest versions of our software products.
Software
EL-Software
EL-Software is the control and management software for EL-CELL battery testers
Download EL-Software (latest version)
EL-Software Server and Client (Microsoft Windows)
Please use this MSI file to install or update the EL-Software Server and/or Client for Microsoft Windows:
| EL-Software Installation or Update for Microsoft Windows | |
| Release | 2.6.1 Build 14071 |
| Date | September 2025 |
| Type | msi Installer (318 MB) |
| Important: Please read the Upgrade Instructions before upgrading from EL-Software Version 1 to Version 2! | |
| Download |
EL-Software Server (Linux, for Appliance Installations only)
The EL-Software Server for Linux can be updated directly via the EL-Software Server Administration website and accessed by the client. Without network access, you can download the required file here:
| EL-Software Server Update Package for Linux | |
| Release | 2.6.1 Build 14071 |
| Date | September 2025 |
| Type | deb (527 MB) |
| Download |
Upgrade EL-Software from Version 1 to Version 2
Important notes on upgrading from EL-Software version 1 to version
Depending on your installed EL-Software version you want to upgrade from, there are different steps to follow. We strongly recommend that you read these instructions first:
 | EL-Software Version 2 Upgrade Instructions | |
| Release version | 1.1 | |
| Date | February 2023 | |
| Type | ||
| Size | 1 MB | |
| Download |
Linux:
Upgrading EL-Software Server from version 1.1.53 to version 2
For EL-Software Server version 1.1.53, please use this file to upgrade to version 2.
| EL-Software Server Upgrade Package for Linux (Version 1.1.53 to Version 2) | |
| Release | 2.6.1 Build 14071 |
| Date | September 2025 |
| Type | tgz (625 MB) |
| Download |
If your EL-Software Server is older than version 1.1.53, you need to update it first to 1.1.53 before upgrading to version 2.
| EL-Software Server Update Package to Version 1.1.53 for Linux | |
| Release | 1.1.53 Build 10716 |
| Date | December 2023 |
| Type | deb (152 MB) |
| Download |
Microsoft Windows
Updating EL-Software Server/Client from older versions to version 1.1.53
If your EL-Software Server is older than version 1.1.53, you need to update it first to 1.1.53 before upgrading to version 2.
| EL-Software Update Installer to Version 1.1.53 for Microsoft Windows | |
| Release | 1.1.53 Build 10716 |
| Date | December 2023 |
| Type | msi Installer (308 MB) |
| Download |
Minimum Hardware Requirements
| EL-Software Server* | ||
| CPU: | Intel i5-12400 or comparable Intel Xeon or AMD64 processor | |
| RAM: | 16 GB | |
| File Storage: | 1 GB SATA-SSD | |
| Network: | 1 Gbit | |
| EL-Software Client | ||
| CPU: | Intel i5 or comparable AMD64 processor | |
| RAM: | 8 GB | |
| File Storage: | 500 MB HDD | |
| Network: | 1 Gbit | |
| Display Resolution: | 1366 x 768 pixel and higher |
*The hardware requirements for the EL-Software Server depend on the number of test channels and the type of measurement protocols. The stated values should only be regarded as a guideline for operating a system with up to 16 test channels.
Software requirements
| EL-Software Server | |
| Operating system: | Windows Server 2022 Windows 10 (x64) version 21H2 or later Windows 11 Linux Ubuntu 18.04* |
| Other | Microsoft Visual C++ 2015-2022 Redistributable (x64) |
| EL-Software Client | |
| Operating system: | Windows 10 (x64) version 21H2 or later Windows 11 |
| Other: | WebView2 (must be installed manually on older Windows 10 versions) |
| * Only on PAT-Testers and Appliance PCs |
EC-Link
EC-Link is a data logger software provided to any user of the following instruments: PAT-Stand-16/PAT-Tray, ECD-3, ECD-3-nano, ECD-2-DL, PAT-Cell-Press, PAT-Cell-Gas (P and SP versions) and ECC-Press-DL.
 | EC-Link Software | |
| Release | 1.3.4.2 | |
| Type | zip | |
| Size | 9 MB | |
| Download |
EC-Link system requirements
You can install the EC-Link software on any computer running one of these operating systems: Windows 10, Windows 8, Windows 7.
Any comments about this page?
Please leave us a note