PAT Batttery Test Cells
The PAT series test cells are available in multiple-cell designs. All PAT cells are designed for long-term measurements with three electrodes.
PAT Battery Test Cells
PAT-Cell
Cableless test cell for high-throughput testing of Li-ion battery materials using the innovative PAT-Core concept.
- Ability for conducting long-term half cell measurements with three electrodes
- No need for cleaning or drying cell components due to single-use concept
- Superior corrosion resistance for next-generation battery chemistries
- Reproducible and homogeneous mechanical pressure on electrodes
PAT-Cell-Gas-HT
Battery test cell for heating the cell stack up to 400°C and analyzing the gases produced
- Bypass system for injection of the reaction gases into the carrier gas
- Full temperature control via EL-Software with definable heating rates and ramps
- Gas In- and Outlet, Gas Sample Port and Pressure Sensor
ECD-4-nano
Advanced Electrochemical Dilatometer for the measurement of electrode expansion with nanometer resolution.
- Capacitive displacement sensor (range 250 μm, resolution better than 5 nm)
- Additional gas pressure (0 to 3 bar) and temperature sensor (-20 to 80° C)
- Cableless connection via PAT socket, with electronic cell tag (PAT-Button)
PAT-Cell-Force
Operando test cell for investigating battery materials under defined force, temperature and gas pressure
- Force adjustment and measurement, up to 1500 Newton
- Built-in temperature, force and gas pressure sensors
- Cableless connection via PAT socket, with electronic cell tag (PAT-Button)
PAT-Cell-Press II
Leakproof test cell for measuring gas evolution.
- PAT-Core design with or without reference electrode
- Sample port and Gas pressure sensor, 0 to 3 bar abs.
- Temperature sensor
PAT-Cell-Gas
PAT-Cell for in-situ gas analysis in a flow-through set-up
- PAT series test cell with gas inlet and outlet
- Lower plungers with perforated plate and with spiral-shaped flow field for optimized plug-flow available.
- Optional laser-welded pressure sensor, 0 to 3 bar abs.
PAT-Cell-HT
Heat resistant PAT series test cell for up to 200°C
- Continuous operating temperature: up to 200°C
- Superior corrosion resistance for next-gen battery chemistries
- Compatible with solid state electrolyte membranes
PAT-Cell-Opto-10
Advanced PAT series test cell for operando characterization of electrodes using optical methods such as light microscopy or Raman spectroscopy in reflection mode.
- High cycling stability due to improved sealing concept
- Electrodes are easily accessible for post-mortem analysis
- Dedicated sample holders for different electrode arrangements available
- Cableless cell connection via PAT socket
PAT-Cell-Twin-Ref
Specialized PAT-Cell for testing simultaneously with two reference electrodes.
- Ability for conducting long-term half cell measurements with two reference electrodes
- No need for cleaning or drying cell components due to single-use concept